Congratulations on purchasing the very best automotive protection on the
market! Nano-Diamond Shield will provide 12-Months of protection to all hard, non-porous exterior automotive surfaces.
Nano-Diamond Shield protection includes:
- 12-Months protection.
- UV Protection.
- No white residue to scrape out of gaps.
- Highly resistant to bird droppings, tree sap, and insect fluids.
- Water bead-up (Hydrophobic).
- Hardens painted surfaces so swirl marks do not occur.
FOR AUTOMOTIVE EXTERIOR PROTECTION ONLY
- READ DIRECTIONS COMPLETELY BEFORE PROCEEDIN
- APPLICATION SHOULD BE PERFORMED IN SHADE.
- EXCESSIVE WIND WILL ADVERSELY AFFECT APPLICATION.
- ALLOW 48-HOURS FOR PROTECTION TO FULLY CURE BEFORE WASHING VEHICLE.
- VEHICLE MAY BE DRIVEN IMMEDIATELY AFTER APPLICATION.
STEP 1. Appling protection to your vehicle.
**APPLY TO ONE SECTION(door, hood or fender) AT A TIME and wipe off immediately. No setup is required. Product is instantly bonded to the surface**
A) Thoroughly wash and completely dry the vehicle to remove dirt and dust that
could prevent product from attaching.
B) Put on the activated carbon N-95 mask provided.
C) Hold can 10-12 inches from surface of vehicle.
D) Dispense product in rapid, overlapping strokes of approximately 2-feet.
E) As a guideline; moving back-and-forth, from top-to-bottom of a car door should
only take about 10-seconds to apply one layer of product.
F) Move around the vehicle spraying all
painted surfaces 1-2 times.
G) Product may be removed immediately, panel by panel.
STEP 2. Removing residue
A) With a clean, dry, cotton or microfiber towel,
simply wipe off the residue.
B) Firm pressure is not required. It is better to use
light to medium pressure, and move the towel rapidly.
C) You’re done!
D) **You May notice a haze appear on the treated surfaces while the product is curing. This is normal and will go away when you wash the vehicle after 48-hours of curing.**
**PLEASE READ THE NOTES PROVIDED BELOW**
This product is only for use on the exterior automobile surfaces. For additional information, please read our FAQ section on our website.
Nano Diamond Shield is not a “cleaner wax” and will not remove surface imperfections. If you have existing water-spots, swirl marks or other irregularities, they should be removed prior to application of our product.
Nano Diamond Shield can be applied over existing wax or other products. There is no need to strip the surface prior to application. Carnauba Wax can also be applied over Nano-Diamond Shield.
Product can be reapplied at any time. Multiple applications will increase protection and shine!
Storage and Application Tips:
Keep product from extreme temperatures (below 32-F or above 115-F)
Best when applied with temperature between 50 – 90 degrees Fahrenheit.
Nano-Diamond Shield is made of VERY small particles.
Excessive wind will blow product away from vehicle. Apply product in sheltered areas, or in calm weather.
Nano-Diamond Shield is the very best Once-A-Year auto exterior protectant available. It can be applied to any exterior surface, and will protect Paint, Glass, Metal, and Plastic.
Overspray is not a concern. Nano-Diamond Shield can be applied to all exterior surfaces without worry.
Nano-Diamond Shield is fantastic on glass and wheels as well.
We recommend one can for your paint, and another for 12-month protection of your glass and wheels. Once applied, water will just run-off the glass, and brake dust will rinse off the wheels without even agitating with a sponge. Nano-Diamond Shield will also help protect the wheel from the corrosive effects of brake dust.
For clarification regarding the application of this product, please contact the manufacturer at info@CrystalViewChemicals.com.